|
|
PGHCONNECT > CUSTOMER SUPPORT > MACOS 8/9
Mac OS 8 / OS 9 Dial-Up Networking Setup
Step 1. Open your Hard Disk and select the Assistants Folder.
Click on the icon labeled Internet Setup Assistant
|
|
Step 2. Click Yes to continue.
|
|
Step 3. Click Yes to create the first Internet account.
|
|
Step 4. Click the right arrow to continue.
|
Step 5. For What would you like to name this configuration?, enter PGHConnect.
For How will you be connection to the Internet?, click Modem.
Click the right arrow to continue.
|
|
Step 6. Select your Modem, Port and select between tone and pulse.
Click the right arrow to continue.
|
|
Step 7. The phone number for this configuration should be your PGHConnect local access number. (To disable call waiting, enter *70, followed by a comma, before your local access number.)
The name you use with this service should be your PGHConnect username.
Your password should be your PGHConnect password.
Click the right arrow to continue.
|
|
Step 8. Under PPP Connect Script, select No. Click the right arrow to continue
|
|
Step 9. Under Domain Name Servers, enter the following numbers for the DNS addresses:
Enter PGHConnect.com for the Domain Name.
Click the right arrow to continue.
|
|
Step 10. Enter your E-mail address (username@pghmail.com) and your PGHConnect password.
Click the right arrow to continue.
|
|
Step 11. Enter mail.pghmail.com for your incoming mail and mail.pghmail.com for outgoing mail. Click the right arrow to continue.
|
|
Step 12. Unless you have a newsgroup you would like to join click the right arrow to continue.
|
|
Step 13. Select No and click on the right arrow.
|
|
Step 14. Just click on Go Ahead and setup is complete.
|
|
Please contact webmaster@pghconnect.com with questions or comments about this site.
Copyright © 2006 Pittsburgh Connect. All rights reserved.
|
